Danabridge app user guide

danalock-user

You are the proud owner of a Danalock
and have installed the Danalock app.

Now you wish to be able to remotely control
your Danalock from anywhere in the world
using an old smartphone or tablet as a gateway
with the free Danabridge app.

danabridge-hallway+iPad


Before you begin, some basic rules:

Danabridge_basic-rule1


Two buttons - not on/off

The green and red circle in the keychain is actually two buttons! This means that if you want to lock your door using Danabridge, you have to press the red part of the circle or one of the colored keyholes - not the center.

Danabridge_basic-rule2


Unlocking an unlocked causes stall
If you press the green keyhole and the lock is already unlocked, this will cause the Danalock to “stall” for a small amount of time. Same thing happens if you try to remote lock the door, and the door is already locked.


Danabridge App - Setup the Bridgedevice:

1

Download the free Danabridge app on a iPhone or an iPad on App Store. Just search for Danabridge and download the app.

2

When the download is complete the app icon will be located on the main screen on your iPhone or Ipad. Now your ready to set up your old iPhone or iPad as a Bridgedevice.

3

First you will be asked to login with your existing Danalock owner name and password.

4

When the Bridgedevice is connected to the Danalock the main status page opens up.

Warnings will be displayed in red if the
Wi-Fi connection is lost or if the Bridgedevice looses power:

no-connection

At the bottom you can press an icon to configure the bridge settings or delete the Danabridge connection. Press configuration.

 

5

Name the Danabridge and press the arrow in the right corner at the bottom.

6

Now you see a list of the Danalocks you own. You can see if they are linked to this or another Danabridge device. Press the grey arrow next to the name of the lock you want to bridge control.

You can control several Danalocks with the Danabride, as long as the Bridgedevice is within Bluetooth range of the Danalocks. If the distance is too big you just download the Danabridge app on another old iPhone or iPad.

7

If the Danalock you wish to remote control is already linked to a Danabride you just override it by pressing the Bridge symbol and confirming your choise.

 

8

If the Bridgedevice is too far away from the Danalock you will get this screen. Press the arrow to the right at the bottom of the screen when you are in reach. That arrow is greyed out if the distance is too far.

 

 

9

Confirm your bridge by sliding the switch to the right.

Press the arrow to the left of the screen bottom to go back to the list.

10

Now your Danalock is bridged.

Press the arrow on the right side at the bottom of the screen.

11

Leave the Danabridge app open on the iPhone or iPad.

Now you send an access invitation to yourself or the user you wish should remote conrol the Danalock. Go to your Danalock app:


Danalock App - invite yourself or a user:

12

All Danabridge access is generated via Lock user invitations.
This means that you even have to invite yourself to the Danabridge.

Open the Danalock app and press Menu in the top right corner of the screen.

danabridge_menu-screen

Then in the Menu press the Lock users button to create a user.

13

Enable ”Give this user remote access using the Danalock bridge app” and send the invitation by Danalock user, SMS or email.

If you use SMS or email you press the link sent to you to
my-danalock.com and write your Danalock username and password or create a user. (click here to read more)

14

In your Danalock app you will get a notification when you or the user has accepted the invitation.

Bridge-cloud

 

 

Test the Danabridge remote control by switching Bluetooth off on your smartphone with the Danalock app. Remember to have Wi-Fi enabled on both devices.

16

On your keychain the bridged Danalock is easily recognized by the Danabridge logo on top of the red and green lock symbol.


Danalock app user guide

danalock-user

You are the proud owner of a Danalock
and has installed the Danalock app.

Now you wish to be able to remotely control
your Danalock from anywhere in the world
using an old smartphone or tablet as a
gateway with the free Danabridge app.

danabridge-hallway+iPhone-for-explanation


Danabridge App - Setup the Bridgedevice:

1

Download the free Danabridge app on a iPhone or an iPad on App Store. Just search for Danabridge and download the app.

2

When the download is complete the app icon will be located on the main screen on your iPhone or Ipad. Now your ready to set up your old iPhone or iPad as a Bridgedevice.

3

First you will be asked to login with your existing Danalock owner name and password.

4

When the Bridgedevice is connected to the Danalock the main status page opens up.

Warnings will be displayed in red if the
Wi-Fi connection is lost or if the Bridgedevice looses power:

no-connection

At the bottom you can press an icon to configure the bridge settings or delete the Danabridge connection. Press configuration.

5

Name the Danabridge and press the arrow in the right corner at the bottom.

6

Now you see a list of the Danalocks you own. You can see if they are linked to this or another Danabridge device. Press the grey arrow next to the name of the lock you want to bridge control.

You can control several Danalocks with the Danabride, as long as the Bridgedevice is within Bluetooth range of the Danalocks. If the distance is too big you just download the Danabridge app on another old iPhone or iPad.

7

If the Danalock you wish to remote control is already linked to a Danabride you just override it by pressing the Bridge symbol and confirming your choise.

 

8

If the Bridgedevice is too far away from the Danalock you will get this screen. Press the arrow to the right at the bottom of the screen when you are in reach. That arrow is greyed out if the distance is too far.

9

Confirm your bridge by sliding the switch to the right.

Press the arrow to the left of the screen bottom to go back to the list.

10

Now your Danalock is bridged.

Press the arrow on the right side at the bottom of the screen.

11

Leave the Danabridge app open on the iPhone or iPad.

Now you send an access invitation to yourself or the user you wish should remote conrol the Danalock. Go to your Danalock app:

 

 

 

Danalock App - invite yourself or a user:

12

All Danabridge access is generated via Lock user invitations.
This means that you even have to invite yourself to the Danabridge.

Open the Danalock app and press Menu in the top right corner of the screen.

 

danabridge_menu-screen

Then in the Menu press the Lock users button to create a user.

13

Enable ”Give this user remote access using the Danalock bridge app” and send the invitation by Danalock user, SMS or email.

If you use SMS or email you press the link sent to you to
my-danalock.com and write your Danalock username and password or create a user. (click here to read more)

14

In your Danalock app you will get a notification when you or the user has accepted the invitation.

from-app-to-cloud-to-danabridge

Test the Danabridge remote control by switching Bluetooth off on your smartphone with the Danalock app. Remember to have Wi-Fi enabled on both devices.

16

On your keychain the bridged Danalock is easily recognized by the Danabridge logo on top of the red and green lock symbol.