Danabridge App

Operate Your Danalock Remotely
Only available for iOS devices

One circle, two buttons

The green and red circle in the keychain is actually two buttons! To lock your door using the Danabridge app, press the red half or the red keyhole - not the center.

1br-u195758-fr
2br-u195759-fr

How to avoid stalling

If you mistakenly unlock the door when it is already unlocked, this will cause the Danalock to "stall" for a short time. The same thing will happen if you try to lock the door when it is already locked. Just wait a few moments and you will be able to use the app again.

You can operate multiple Danalock smart locks with the Danabridge,
as long as the bridge device (such as an old iPhone or iPad that has been previously paired) is within Bluetooth range of the Danalocks.

Setting up the Bridge Device

danabridge1

1

Download the free Danabridge app on an iPhone or an iPad on App Store.

Search for "Danabridge" and download the app.

danabridge2

2

When the download is complete, the app icon will be located on the iPhone or iPad's home screen.

Now you're ready to set up your old iPhone or iPad as a Bridge device.

danabridge4

3

Enter your Danalock app login credentials.

danabridge5

4

This screen will appear. Select "Configure setting".

danabridge6

5

If the Bridge device is too far away from the Danalock you will get this screen.

Select the arrow at the bottom right when you are within range. (The arrow will be greyed out if you are out of range.)

danabridge3

6

Name the Danabridge and press the arrow at the bottom right.

danabridge7

7

A list of the Danalocks you have configured will appear. You can see if they are linked to this or another Danabridge device. Select the grey arrow to the right of the Danalock you want to remote control.

You can control several Danalocks with the Danabridge, as long as the Bridge device is within Bluetooth range. If the distance is too great, download the Danabridge app onto another old iPhone or iPad.

danabridge8

8

When the Danalock is bridged, the box to the left will be checked off.

danabridge14

9

If your lock is bridged by another user, you will see a "!" symbol. To overwrite, press the symbol.

You will be asked to confirm the override. Select OK to confirm.

danabridge5

10

Leave the Danabridge app open on the iPhone or iPad and make sure the phone or tablet is AC powered and has Bluetooth and Wi-Fi activated.

Deactivate the sleep screen.

Send an access invitation to yourself and any additional users you wish to authorize. Go to your Danalock app:

danabridge9

11

Danalock app - Invite yourself
Danabridge access is activated via "Lock user" invitations. You even have to invite yourself to the Danabridge.

Open the Danalock app and press "Lock users" at the bottom of the screen.

danabridge12

12

Danalock app - Invite yourself
Enable "Give this user remote access using the Danalock bridge app" and send an invitation by Danalock user, SMS or email.

danabridge11

13

Danalock app - Invite yourself
You will receive a notification in your Danalock app when you or another user has accepted the invitation.

danabridge13

14

Danalock app - Invite yourself
The bridged Danalock is easily recognized by the red and green lock symbol on your keychain.

danabridge10

15

Test the bridge
Test the Danabridge remote control by switching Bluetooth off on your smartphone with the Danalock app.
Remember to have Wi-Fi enabled on both devices.

Scroll Up